Azbil SDC15 User Manual

5-12
■ LSP system group setup
(1) In the operation display mode, keep the [para] key
pressed for 2 sec. or longer.
>> The unit then enters the parameter setting mode.
(2) In the parameter setting display mode, keep the [para]
key pressed for 2 sec. or longer.
>> The display is then changed to the setup setting
display.
(3) Press the [para] key several times.
>> Display the setup setting [C30: LSP system group].
(4) Press the [<], [], or []key to change the set value
in [C30].
Setting range: 1 to 4
>> When no keys are pressed for 2 sec. or longer, the flashing of the numeric
value is stopped to set the currently displayed value.
(5) Press the [mode] key.
>> The display is returned to the operation display.
<
<
Chapter 5. SETTINGS BEFORE STARTING OPERATION
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp

Azbil SDC15 Specifications

General

Brand	Azbil
Model	SDC15
Category	Controller
Language	English