B. Braun microspeed uni - Page 36

34
microspeed® uni motor system
Aesculap Power Systems
Language setting
¾ Press control key “Language” in submenu “Setting”.
Fig. 36
Legend
A Control key for language display:
Select language; the selected language will be displayed on a green
background
B Control key "Save setting":
The control key "Save setting" will be highlighted by a green
background whenever a setting was changed. Pressing this key will
cause the change to be saved. Once the change has been saved, the
control key will be displayed on a white background.
C Control key "Change to higher menu level"
(to submenu Device-specific settings)
D Control key "EXIT":
To exit from the Instruction menu
Setting the volume of acoustic alarm/notification signals
¾ Press control key “Setting” in submenu “Device setting”.
Fig. 37
Legend
A Qualitative bar display of the volume to be set
B Control keys “Change volume”
C Control key “Volume”:
To call up an acoustic signal at the presently set volume
D Control key "Save setting":
The control key "Save setting" will be highlighted by a green
background whenever a setting was changed.
Pressing this key will cause the change to be saved. Once the change
has been saved, the control key will be displayed on a white
background.
E Control key "Change to higher menu level"
(to submenu Device-specific settings)
F Control key "EXIT":
To exit from the Instruction menu
A
A
D
A
C B
A
F
C
E
B
D