Basic safety precautions Page 1/44
MID_M2000_BA_02_1004
1. Basic safety precautions
The electromagnetic flow meter is only suitable for the measurement of conductive fluids.
The manufacturer is not liable for damages that result from inproper use or from use that
is not in accordance with the requirements.
The meters are constructed according to state-of-the-art technology and tested
operationally reliable. They have left the factory in a faultless condition concerning safety
regulations.
The mounting, electric installation, putting into operation and maintenance of the meter is
to be carried out by suitable technicians. Furthermore the operating personnel has to be
trained by the operating authority and the instructions of this manual have to be followed.
Basically you have to respect the regulations for the opening and repairing of electrical
equipment applicable in your country.
Repairs
Should you send back a flow meter, please take notice of the following points:
- Please enclose a description of the error as well as a precise statement of the
measured medium (if necessary a safety specification sheet).
- The meter has to be in a cleaned condition (outside and inside). Especially with harmful
measuring mediums you have to pay attention that there are no impurities in the pipe
or at the connections.
- If it is not possible to clean the meter completely, particularly with harmful materials, do
not send back the meter.
We reserve the right to repair only cleaned meters. Costs, which result from insufficient
cleaning, will be charged to you.
RoHs
Our products are RoHs compliant.
To Next Page
Loading...
Need help?
General
