64394-009 Integrated Pit Lid Hanger Install Kit
ORI-UM-00025-EN-19
64394009 INTEGRATED PIT LID HANGER INSTALL KIT
Integrated Pit Lid Hanger Install Kit (PN: 64394-009) is designed for ORION endpoints installed below composite and
plastic lids that have an integrated AMR/AMI endpoint hanger.
For use with: ORION Fixed Network, Migratable, and Classic endpoints
To install an ORION endpoint with this kit, follow these steps and refer to Figure 36.
1. Thread the lock nut onto the top of the ORION endpoint as shown.
2. Slide the endpoint into the lid bracket.
3. Tighten the lock nut so that the endpoint is held rmly in place.
Installation is complete.
Figure 36: Integrated pit lid hanger installation
Page 22 February 2019
To Next Page
Loading...
Need help?
General
