Endpoint Status Tool for ORION Cellular Endpoints
ORI-UM-00025-EN-19
ENDPOINT STATUS TOOL FOR ORION CELLULAR ENDPOINTS
BEACON® AMA users can check the activation status of ORION Cellular endpoints with the ORION Endpoint Status tool.
Several minutes after installation, the tool displays ORION Cellular endpoints assigned to you. Endpoints do not need to be
provisioned in BEACON AMA to display.
The browser-based tool can be viewed on a computer or mobile device. An Internet connection is required. Follow these
steps to use the ORION Endpoint Status tool.
1. Go to https://orionstatus.beaconama.net.
2. Sign in with your BEACON email address and password (Figure 49).
Result: The ORION Endpoint Status screen (Figure 50) opens showing the list of activated Cellular endpoints.
Figure 49: Tool sign in screen - computer and mobile
OTE:N It can take several minutes for a newly installed endpoint to communicate with the cellular network and
display on the ORION Endpoint Status screen.
3. View the endpoint list.
The list displays endpoint serial number, activation time, and activation signal strength. The current endpoint and
meter status are also shown. Endpoints are listed according to their activation time, with the most recent endpoint
activation times listed rst (top of list).
Information at time of activation
Current information
Figure 50: Endpoint status list - computer and mobile
You can also Export endpoints into a program such as Excel®, or Search to find a specific endpoint.
4. To see any new endpoints that have been added since logging in, reload/refresh the browser window. On a
computer, use the reload button at the top left of the screen. On a mobile device, swipe down the screen
to refresh.
Page 27 February 2019
To Next Page
Loading...
Need help?
General
