Bailey NICS01 - Section 1 - Introduction; Overview of NICS01 Module

OVERVIEW
I-E96-409A 1 - 1
SECTION 1 - INTRODUCTION
OVERVIEW
The NICS01 Controller/Station Termination Module provides
I/O connections for IMQRS02 and IMCIS02 Slave Modules,
IMCOM03 and IMCOM04 Controller Modules and IMQRC01
Quick Response Controllers. Also provided are connections for
control stations (no analog output bypass capability), digital
indicator stations, and serial link connections to multi-function
processor/multi-function controller modules through their
respective termination modules. An NIDS01 Termination Module
can be connected to the ICS module with a ribbon cable. This
allows the daisy-chaining of additional stations and enables the
analog output bypass capability of the first control station in a
daisy chain. Figure 1-1 shows an example NICS01 application.
Figure 1-1. Example NICS01 Application
COMMUNICATION HIGHWAY (INFI-NET OR PLANT LOOP)
MODULE BUS
IMCOM03
IMCOM04
IMQRC01
IMMFC03/04/05
IMMFP01/02/03
IMCIS02
IMQRS02
NICS01 NIDS01
NDIS01
NDCS03
IISAC01
STATIONS
NDIS01
NDCS03
IISAC01
STATIONS
ANALOG AND
DIGITAL I/O
ANALOG AND
DIGITAL I/O
OTHER MODULES
OTHER SLAVE
MODULES
SLAVE EXPANDER BUS
COMMUNICATION
MODULES
T00496A
NICS01