INTRODUCTION
I-E96-409A 3 - 1
SECTION 3 - MAINTENANCE
INTRODUCTION
The controller/station termination module requires limited
maintenance. This section contains a maintenance schedule.
MAINTENANCE SCHEDULE
Execute the tasks in Table 3-1 at the specified intervals.
Table 3-1. Maintenance Schedule
Task Interval
Clean and tighten all power and field
wiring connections.
Every 6 months or
during plant shutdown,
whichever occurs first.
Use a static safe vacuum cleaner to
remove dust from:
Modules.
Module mounting unit.
Termination modules.
Termination mounting unit.
To Next Page
Loading...
