62
3. Continue this process until you
have configured all the required
inputs.
Click Next > to continue.
The Undo Changes button can
be used to reset all the items on
the tab to their original values.
4.4.2 Digital output configuration
The Digital Output Configuration tab allows you to define how each digital output will operate and if it is
to be allocated to the drive enable output. If you do not wish to configure any outputs at this stage, click
Next > and go to section 4.4.3.
1. Drag the appropriate icons to
setup the digital outputs.
If you do not understand an item,
click in its box and read the
information shown in the help
bar at the bottom of the window.
The Undo Changes button can
be used to reset all the items on
the tab to their original values.
When you have finished, click
Next > to continue.
Note: The purpose of the Drive Enable Output is to provide an indication of the MintDrive’s enabled
status. Its use is optional and it does not have to be assigned to an output for the MintDrive
to be operational.
To Next Page
Loading...
