Baldor MintDrive - Axis0 parameter configuration; Axis0 error configuration; Mint WorkBench

63
4.4.3 Axis0 parameter co n f ig uration
The Axis0 Parameter Configuration tab allows you to setup various axis parameters.
If you do not wish to make any changes, click Next > and go to section 4.4.4.
1. Click in the appropriate boxes
and type the required values.
If you do not understand an item,
click in its box and read the
information shown in the help
bar at the bottom of the window.
The Undo Changes button can
be used to reset all the items on
the tab to their original values.
When you have finished, click
Next > to continue.
4.4.4 Axis0 error conf ig uration
The Axis0 Error Configuration tab allows you to setup various axis error parameters.
If you do not wish to make any changes, click Next > and go to section 4.4.5.
1. Click in the appropriate boxes
and type the required values.
If you do not understand an item,
click in its box and read the
information shown in the help
bar at the bottom of the window.
The Undo Changes button can
be used to reset all the items on
the tab to their original values.
When you have finished, click
Next > to continue.