66
4. The Save As dialog box will be shown.
The first file to save is the project file.
This file can be loaded into MCT and edited later.
Select a folder and enter a filename for the project file.
Click Save .
5. The second file to save is the configuration file.
This is the file that can be loaded into Mint Workbench
and sent to the MintDrive.
Select a folder and enter a filename for the
configuration file.
Click Save .
A number of things will now happen:
H The configuration file will be saved;
H MCT will be closed;
H Mint WorkBench will be started;
H The configuration file will be automatically loaded into WorkBench.
To Next Page
Loading...
