103R5911705 /02 Bragi
6.8.9 Night vision
About
When using e.g. displayport 1 as daylight image input, and displayport 2 as night vision input, this option make
it possible to swap these two channels in the image processing in order to synchronize with the NV goggles.
This function is only available for the FS variants of the projector.
How to swap channels
Select the Menu/ Image / Advanced / Night Vision.
menu
Toggle the Swap channel function on / off by pressing the OK button on the remote control or the keypad.
Image 6–33
Image menu
To Next Page
Loading...
