Barco Bragi

R5911705 /02 Bragi78
Image 5–5
The available input connectors are displayed.
4. Select the desired connector.
Image 5–6
The Connector Settings menu for this connector will be displayed.
Image 5–7 Example of connector settings of an Displayport Connector.
5. You can change the following:
• To force a limit on the color space, select one of the available color spaces.
• To force a limit on the used signal range, select one of the available signal ranges.
• To set a video timing other than the one native for the connector, select one of the options under EDID.
Source menu