Barco FLM HD20 - Picture in Picture Activation; Picture in Picture Size of the Window

10. Layout menu
Image 10-20
Position of PiP
A Top position
B Left position
10.3.2 Picture in Picture activation
How to activate PIP?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Layout and press ENTER.
3. Use the ▲ or ▼ key to select PIP Window and press ENTER.
The PIP window opens.
4. Use the ▲ or ▼ key to select On or Off and press ENTER to toggle between [On] and [Off].
Image 10-21
Image 10-22
Image 10-23
5. Press EXIT to quit the menu.
When PIP is activated (ON state), the PIP window becomes the active window. Switching to the main window
is still possible with the window button on the RCU.
10.3.3 Picture in Picture size of the window
What can be done?
The width and height of the picture in picture window can be changed till the desired dimensions are obtained.
100
R59770180 FLM HD20 11/07/2008