14. Service menu
The convergence pattern is displayed. Press ENTER to toggle to another pattern. Press EXIT to return to the menu.
Image 14-35
Image 14-36
14.5 Internal service patterns
How to select
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Internal service patterns and press ENTER.
The internal service pattern window opens.
4. Use the ▲ or ▼ key to select the desired patterns and press ENTER.
When a pattern is selected, press ENTER to toggle to other patterns of the selected type. Press EXIT to return to the internal
service pattern menu.
Image 14-37
Image 14-38
Image 14-39
14.6 Restore factory defaults
What can be done?
All settings of the projector will be set to the original factory settings. All user settings are erased with this operation.
How to return to the default settings
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and
press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Restore factory defaults and press ENTER.
R59770180 FLM HD20 11/07/2008
161
To Next Page
Loading...
