EasyManua.ls Logo

Barco FLM HD20 - Specifications

Barco FLM HD20
223 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21. Specifications
Ambient Temperature
Max 40°C (104°F)
Inputs
•congurable 5 cable (BNC)
•DVI
(HD)SDI (+ loop through)
Input source compatibility
max. input: up to QXGA (2048 x 1536)
Dust lters
Dense, high quality microlters, also available as spare kit
Brightness uniformity
> 90 % for the total screen
Display
3-chip DLP HD (1920 x 1080 pixels, aspect ratio 16:9)
Lens Shift
Vertical: -10% to +110%
Horizontal: -30% to +30%
(small differences exist per lens type, e.g. short throw lenses have less shift)
On board display server
Ethernet control standard
remote control projector over ethernet via Projector Toolset
Outputs
HDSDI/ SDI loop out
Communication
1x RS-232C IN (D-9 connector)
1x RS-232C OUT (D-9 connector)
1x RS-232C IN (XLR connector)
2x prop. protocol (RJ45 connector)
xlr and mini-jack for wired remote control
Compatibility
All current video sources (PAL, SECAM, NTSC) in Composite, S-Video, Component or RGB formats
All current HDTV sources
All computer graphics formats from VGA, SVGA, XGA, SXGA, full HD, UXGA to QXGA
Most Macintosh computers
Electronic workstations with a resolution up to QXGA (2048 x 1536 pixels @ 60 Hz)
Most computer sources with a pixel clock up to 300 MHz
DVI sources up to DC2K (2048 x 1080)
Power Dissipation
max 13,300BTU/h
202
R59770180 FLM HD20 11/07/2008

Table of Contents

Related product manuals