Barco FLM HD20 - 8 Input Menu; Overview Flow; Slot Module Type; About Input Setup

8. Input menu
8. INPUT MENU
Overview
•Overviewflow
• Slot module type
• Input locking
• Minimum delay
• Native resolution
• Source switching
• No signal
8.1 Overview flow
Overview
Level 1 Level 2 Level 3
Input
Slot module type
5-cable
HD-SDI - SDI
DVI
Input locking Free running
Automatic
Input 1 to 4
Minimum delay [On/Off]
Native resolution [On/Off]
Source switching Effect
Effect time
No signal Color [black/blue]
Shutdown [Off/On]
Shutdown time
8.2 Slot module type
Overview
• About Input Setup
• Input confi guration
8.2.1 About Input Setup
Overview
Each input module must be configured before these module can be used. This configuration is necessary so that the projector knows
which type of signal is connected to its input.
The projector has 4 input slots and these slots can be filled up in a random order with the available modules. Identical modules are
allowed.
For more information about the available input modules and how to install, see "Input source connections", page 37.
CAUTION: Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
jector.
R59770180 FLM HD20 11/07/2008 59