13. Projector control
13.7.2 Bar scale
What is possible?
The bar scale can be positioned on 3 different places on the screen but always vertically on the right side.
The horizontal position can be:
• Centered
• Top aligned
• Bottom aligned
Brightness: 60
0 100
Brightness: 60
0 100
Brightness: 60
0 100
Image 13-50
Bar scale position
How to change the position
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Menu position and press ENTER.
4. Use the ▲ or ▼ key to select Menu and press ENTER to toggle between [Center], [Top] and [Bottom].
Image 13-51
Image 13-52
Image 13-53
13.8 Local LCD contrast
What is possible?
The contrast of the local LCD can be adapted the needs of the environment.
How to change?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Local LCD contrast and press ENTER.
4. Use the ▲ or ▼ key to adjust the local contrast.
150
R59770180 FLM HD20 11/07/2008
To Next Page
Loading...
