5. Connections
10/100 Base-T — RJ45 port
Pin Description
3RXD+
4
—
5
—
6RXD-
7
—
8
—
USB port
The communication interface is equipped with a master USB port, type “A” connector (H). This USB port will simplify the service
procedures for software updates or for taking backup files from the projector without network connection. An USB-stick is plugged
into the USB port and files can be transferred from or to the projector using the local or remote control unit. Note that the USB-stick
has to be FAT16 compatible.
Card bus connector (PCMCIA)
No cards supported yet.
R59770180 FLM HD20 11/07/2008
41
To Next Page
Loading...
