3. Physical installation
CAUTION: Never transport the projector with a lens mounted in the lens holder. Always remove the lens
before transporting the projector. Neglecting this can damage the lens holder and prism.
3.2.5 Lens removal
How to remove a lens from the projector lens holder ?
1. Support the lens with one hand while you unlock the lens holder by sliding the lock handle towards the “unlocked” position as
illustrated.
Image 3-20
2. Gently pull the lens out of the lens holder.
Image 3-21
It’s recommended to place th
e lens caps of the original lens packaging, back on both sides of the removed
lens to protect the lens.
It’s recommended to place the foam rubber of the original projector packaging, back in the lens opening to
prevent intrusion of dust. Note that this foam rubber is packed in a plastic bag to prevent that dust, emitted
by the foam, enters the projector.
26 R59770180 FLM HD20 11/07/2008
To Next Page
Loading...
