14. Service menu
Image 14-31
14.3.8 Error logging overview
How to get an overview?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Diagnosis and press ENTER.
The diagnosis screen will be displayed.
4. Use the ▲ or ▼ key to select Error logging and press ENTER.
The Error logging overview menu is displayed.
For more explanation about the stored error message, see chapter "20. Troubleshooting", "Error codes", page 193.
Image 14-32
Image 14-33
Image 14-34
14.4 Convergence
What can be done?
The convergence patterns can be used to check the convergence alignment of red, green and blue.
Realignment of the convergence can only be done by a qualified service technician.
How to display the convergence patterns
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press EN
TER.
The service window opens.
3. Use the ▲ or ▼ key to select Convergence and press ENTER.
160
R59770180 FLM HD20 11/07/2008
To Next Page
Loading...
