14. Service menu
The factory defaults confirmation window opens.
4. Use the ▲ or ▼ key to select Yes or No and press ENTER.
If you are sure to restore the factory defaults and to erase the custom settings, select Yes.
If you are not sure, select No.
Image 14-40
Image 14-41
Image 14-42
14.7 Reset formatter
How to reset
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Reset formatter and press ENTER.
The formater reset confirmation window opens.
4. Use the ▲ or ▼ key to select Yes or No and press ENTER.
If you to reset the formatter, select Yes.
If you do not want to reset the formatter, select No.
Image 14-43
Image 14-44
Image 14-45
14.8 Save custom settings
What is done?
The current custom settings can be saved to the internal backup device in the same way as it would be done when the projector
was switched to standby.
How to save
1. Press MENU to activate the menus.
162
R59770180 FLM HD20 11/07/2008
To Next Page
Loading...
