14. Service menu
CAUTION: Restart of the projector is necessary to terminate the refill mode. Before restarting, switch off the
projector and reinstall first the cooling circuit.
14.10 Broadcast mode
Only accessible for HD projectors
What can be done ?
"Broadcast mode" enables special sequences for the DMD’s to support specific sources such as the Thompson Grass Valley World-
cam. It shouldn’t be used in any other circumstances as it would cause image flicker and dimmed images with normal sources.
Default position : [Off]
How to set up
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Broadcast mode and press ENTER to toggle between [Off] and [On].
Image 14-51
Image 14-52
When Broadcast mode ON, switch also Genlock to ON (Input → Input locking → Automatic + Options)and
enter the correct values for this source.
14.11 USB memory
What is possible with an USB device?
An USB device, FAT 16 formatted can be used, to save custom settings from the projector or to load custom settings to the projector.
This function is very handy to clone projectors.
The following settings can be transported via an USB device:
164
R59770180 FLM HD20 11/07/2008
To Next Page
Loading...
