13. Projector control
Image 13-33
Image 13-34
Image 13-35
13.6 Buttons
Functionality
Some buttons on the RCU or local keypad can have a different functionality depending on the need of the projector owner.
Overview
• Standby button
• APA (auto) button
• Shortcut keys
13.6.1 Standby button
What is possible?
When going to standby by pressing the standby button, the following can happen:
• Only the lamp will be switched off.
• The lamp and the power will be switched off.
How to set
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Buttons and press ENTER.
4. Use the ▲ or ▼ key to select Standby and press ENTER to toggle between [Lamp on/off] and [Power up/down].
Image 13-36
Image 13-37
Image 13-38
13.6.2 APA (auto) button
What can be done?
The function of the APA (auto) button can be configured according the wishes of the user.
R59770180 FLM HD20 11/07/2008
147
To Next Page
Loading...
