12. Alignment menu
Level 1 Level 2 Level 3
Gamma
Internal patterns
Checker board
Color bars
Convergence
Focus
Full screen black
Full screen blue
Full screen green
Full screen red
Full screen white
Hatch
Outline
Color space
Projector
EBU
SMPTE
Custom
ScenergiX
Status
Top
Bottom
Left
Right
Black level
12.2 Orientation
What can be done?
The way of physical installation of
theprojectorcanbedefined to the projector.
The following installation are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
Set up the correct orientation
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Orientati
on and press ENTER.
4. Use the ▲ or ▼ key to select the correct orientation and press ENTER.
114
R59770180 FLM HD20 11/07/2008
To Next Page
Loading...
