2. General
U
+110%
-110%
-52% +52%
D
L R
P
F
U
D
SIDE VIEW
P
F
+110%
-110%
TOP VIEW
P
F
L
R
-52%
+52%
Image 2-9
PDMD.
F Field of view.
It’s mechanical possible to shift outside the recommended field of view (±120% UP/DOWN and ±70%
LEFT/RIGHT), but this will result in a slightly decline of image quality depending on the used lens and the
zoom position of the used lens. Furthermore, shifting too much in both directions will result in a blurred
image corner.
Best image quality is projected in the On-Axis configuration.
Horizontal and vertical projector tilt ranges
The projector can be rotated and mounted at any vertical angle. In other words, you can tilt the lens side of the projector as much
as desired for your application. Side to side tile, however, must not exceed 15°. This limit ensures that the lamp in the projector
operates properly and safely.
M
A
X
M
A
X
15°
15°
360°
Image 2-10
CAUTION: Always respect the allowed tilt range of the projector. Neglecting this will result in lamp flicker,
which reduces the light output and the life span of the lamp substantially. Furthermore, in the long term, the
possibility exis
t that the lamp explodes.
R59770180 FLM HD20 11/07/2008 17
To Next Page
Loading...
