3. Physical installation
Image 3-31
6. Lift up the projector and hook the four rigging clamps over the support bars of the truss.
7. Lock all four rigging clamps.
8. Install a safety chain (S) around both sides of the carrying handle and around the truss.
S
S
Image 3-32
9. Lift up the truss with attached projector to the desired height.
Proceed with the alignment procedure, see "Alignment of a ceiling mount FLM projector", page 27.
30 R59770180 FLM HD20 11/07/2008
To Next Page
Loading...
