Barco LED-PRO - Page 149

LED-PRO • User’s Guide 135
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
ibaJmol=pÉêá~ä=`çãã~åÇ=aÉëÅêáéíáçåë
obpe
• Description: Query the available resolution list for the LED-PRO.
• Parameters: None
• Returns: All available resolutions in the format:
n : HxV @F (example: 20 : 1024x768 @59.94)
S RESH (Query all available resolutions)
obpf=åå
• Description: Set current channel's Input Resolution. If Auto Acquire is on,
setting Input resolution with this command may be overridden.
• Parameters: nn - Input Resolution (use RESH command for resolution list)
• Query:
RESI? in
Returns the Input Resolution for the specified channel in the format
= nn
S RESI 1 (Set Input Resolution of currently selected input channel to resolution
index 1 (NTSC(480i))
S RESI? 1 (Queries Input Resolution for channel 1)
^`n=ãçÇÉ
• Description: Turns Auto acquisition mode off/on.
• Parameters: mode [0 | 1] Off | On
• Query:
ACQ?
Returns Auto acquisition mode in the format
= mode
S ACQ 0 (Turns auto acquisition mode off)
S ACQ? (Queries for auto acquisition mode)
afkq=áå=ãçÇÉ
• Description: Sets De-interlacer mode. Motion de-interlacer mode is only
available for Interlaced inputs
• Parameters:
in - Input chnl [1-4]
mode - De-interlacer mode [0-1] Motion | Fld->Frm
• Query:
DINT? in