Barco LED-PRO - Page 156

142 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
• Query:
IRBRT? in c
Returns the Input RGB Brightness value of the specified source in the format
= nnn.n
S IRBRT 1 R 10 (Adjusts input 1 Red Brightness to be +10%.)
S IRBRT? 1 R (Queries input Red Brightness of channel 1.)
fo`kq=áå=Å=åååKå==
• Description: Adjusts the Input RGB Contrast values.
• Parameters:
in - Input chnl [1-3]
c - Color [R|G|B]
nnn.n - Contrast value; Range -25% to +25%
• Query:
IRCNT? in c
Returns the Input RGB Contrast values of the specified source in the format
= nnn.n
S IRCNT 1 B -15 (Adjusts input 1 Blue Contrast to be -15%.)
S IRCNT? 1 B (Queries input Blue Contrast of Channel 1.)
fp^q=áå=ååå
• Description: Adjust Input Saturation.
• Parameters:
in - Input chnl [1-4]
nnn - Input Saturation (75 - 125 if input is YPbPr, 0 - 150 otherwise)
• Query:
ISAT? in
Returns the Input Saturation in the format
= nnn
S ISAT 1 100 (Adjusts Input Saturation of channel 1 to 100)
S ISAT? 1 (Queries Input Saturation of channel 1)
fpjm=áå=å
• Description: Adjust Input Sample Mode.
• Parameters:
in - Input chnl (1-3)
n - Input Sample Mode: n[0-1], Oversample | 1:1
Note
Some input's sample mode can only be set to oversample,
some can only be set to 1:1.