Barco RLM W12

50
6
OSD Menu description

2.
Colormatching2projectorsonwhiteisdonewithP7(R.G.B.C.M.Y.W)adjustinprojector
toolset.
3. Brightnessmatching2projectorscanbedonewiththelamppower(Referto
adjustmentbydimmingtheprojectorwithhigherlumens.
4. UseScenergiX-> Whiteleveltosettheblendingsizebasedontheoverlap
regionsize.
UseScenergiX-> Blacklevelpositiontoadjustthestartpositionofblacklevel
compensation. 
UseScenergiX-> Blackleveltoraisethebrightnessofnon-overlapzonesuch
thatthebrightnessoftheoverlapzoneandnon-overlapzonearematchedfor
blacklevel.

 Note1: Pleasenotethatthefollowing allowablewarp,blankingandScenergiXcombination 
 basedontheunderlyingchipspecication 
Note2: ScenergiX/4cornercombinationisavailablewhenblacklevelisnotadjusted. 
Note3: Blendalongcornersisavailablewhenblacklevelisnotadjusted.
Black Level Black Level
Black Level
Keystone Rotation Pin/Barrel 4-corner blanking
Top/Bottom or
Left/Right only
Blend along corners Black Level
Keystone X X X X X X X
Rotation X X X X X X X
Pin/Barrel X X X X X X X
4-corner
X
X
X
OK OK OK
X
blanking X X X OK OK OK OK
Top/Bottom or
Left/Right only
X X X OK OK OK
Blend along corners X X X OK OK X
X X X X OK OK X
ScenergiX
ScenergiX
White Level
White Level