R5911443 /02 UDM 59
Image 6-7: Select source
4. Select the desired connector.
The Connector Settings menu for this connector will be displayed.
Image 6-8: Example of connector settings for an HDMI connector
5. You can change the following:
• To force a limit on the color space, select one of the available color spaces.
• To force a limit on the used signal range, select one of the available signal ranges.
• To set a video timing other than the one native for the connector, select one of the options under EDID.
Note: You cannot change the EDID for SDI connectors.
GUI – Source
To Next Page
Loading...
