R5911443 /02 UDM84
Image 8-21: 4 corner adjustment
How to adjust the image?
1. In the main menu, select Installation → Warp → 4 Corners.
Image 8-22: Warp menu, 4 Corners
The 4 Corners menu is displayed.
Image 8-23: 4 Corners Warping
2. To enable 4 Corners warping, make sure the 4 corners slider is set to On.
Image 8-24
The slider is enabled when set to the right and when it is colored blue.
3. Use the arrow keys to select the four corners and confirm. The corners will be colored blue.
GUI – Installation
To Next Page
Loading...
