Barcrest MPU6 - Page 8

8
6.1 IButton Functionality 84
6.1.1 Hopper Top Up and Secondary Test Switch 84
6.1.2 Hopper Top up/Secondary IButton Registration 84
6.1.3 Refill Mode Switch. 85
6.1.4 Refill IButton Registration 85
6.1.5 Hopper Dump Switch 86
6.1.6 Hopper Dump IButton Key Registration 86
6.1.7 Machine Configuration Settings IButton Cell 86
6.1.8 Machine Security Identification IButton Cell 86
SECTION 7 COIN HANDLING EQUIPMENT..................................................................87
7.1 Dual Hopper Shelf 87
7.1.1 Hopper Assembly Removal 87
7.1.2 Dual hopper Shelf Disassembly 88
7.1.3 Hopper Bed Removal and Replacement 89
7.2 Coin Mechanism replacement 90
7.2.1 Resetting the CCtalk Address on the SR5i mech 90
7.2.2 Resetting the Encryption key to factory default. 90
7.2.3 Removal 91
7.2.4 Refitting 91
SECTION 8: HORIZON MPU6 PROGRAMMING AND CLOCK SETTING. ..................92
8.1 MPU6 Programming instructions 92
8.2 MPU6 Real Time Clock set up 93