BAS 100B/W - Convert Files; Delete Files; Rename Files; Setup

3-3
3.6 Convert Files
Convert Files
is used to convert data files between the binary (.BIN) and text (.TXT,
.CRL, .SPC and .TAB) formats. Up to 100 files can be selected. After the file(s) have
been selected, the program prompts you to confirm the number of files. The text
format is determined by the
Text Data Format
dialog box (3.10).
As the converted files are listed on the screen, you can press <
Enter
> to Pause the
listing or press <
Esc
> to Cancel further lines or click on [
Pause
] or [
Cancel
] in the
BAS100W Listing box.
Note
: Files cannot be connected from one text format to another text format.
3.7 Delete Files
Delete Files
can delete up to 100 files of any type. After the file(s) have been
selected, the program prompts you to confirm the number of files.
As the deleted files are listed on the screen, you can press <
Enter
> to Pause the
listing or press <
Esc
> to Cancel further lines or click on [
Pause
] or [
Cancel
] in the
BAS100W Listing box.
3.8 Rename Files
The
Rename Files
command allows the names of up to 100 files of any type to be
changed. After the file(s) have been selected, the program prompts you to enter the
new file name.
3.9 Setup
Figure 3-2. Setup
dialog box.