BAS 100B/W - Text Data Format; Exit

3-5
Oxidation Current
This specifies the sign of an oxidation current - positive
Polarity
(IUPAC convention) or negative (classical convention).
3.10 Text Data Format
When data are listed on the screen, or saved in a text format, each data point includes
an X value (typically potential or time), and one or more Y values (typically current
or charge). The
Text Data Format
dialog box provides a selection of data column
delimiters.
Figure 3-3. Text Data Format
dialog box.
The file extension for each format option is indicated in parentheses. The default
delimiter is
Comma + Space
, and the default extension is
.txt
.
Omit conditions and
segments
will allow conversions of
.bin
to a text format without the header and the
separators between segments. These files cannot be loaded back into the 100W
program.
3.11 Exit
Upon exiting the software, the method parameters for the last experiment are saved in
a TEMP.MOD file, and the
Setup
options,
Graph Options
and
Colors
, window
sizes and positions are saved in a 100W.INI file.