1-4
Potentiostat
Output compliance voltage
±
12 volts minimum
Applied voltage range -3.276 volts to +3.276 volts
Minimum potential step size 100 microvolts
Absolute accuracy
±
2.5 millivolts
Reference input impedance >10
11
ohms
Maximum output current 190 milliamperes
Risetime <2 microseconds
Slew rate 10 Volts/microsecond minimum
Stability 500 microvolts/day
Effects of
±
10% input
power line variation 100 microvolts maximum
Noise and ripple 100 microvolts RMS maximum
Current to Voltage Converter
Maximum current 190 milliamperes
Ranges 100 milliamperes/volt
10 milliamperes/volt
1 milliamperes/volt
100 microamperes/volt
10 microamperes/volt
1 microampere/volt
100 nanoamperes/volt
Fullscale output
±
10 volts
Input voltage drift 500 microseconds/day maximum
Input current drift 25 picoamperes/day maximum
Conversion rate 20,000 conversions/sec or
50 microseconds/conversion
Absolute accuracy 1% fullscale
Resolution 0.05% fullscale
Charge to Voltage Converter
Maximum charge 3.2 millicoulombs
Range 10 microcoulombs/volt (auto range)
1 microcoulombs/volt
100 nanocoulombs/volt
General
Input voltage 110 volts, 120 volts, 220 volts, 240 volts
Alternating Current 50 or 60 Hertz
Input power 720 watts maximum
1 power outlet 120 volts Alternating Current @ 2A total.
To Next Page
Loading...