10-20
Mode = STEP
General Parameters
Initial E (mV) = 0 -3276 to 3276
High E (mV) = 0 -3276 to 3276
Low E (mV) = 0 -3276 to 3276
Initial Direction = Negative Negative or Positive
Pulse width (msec) = 250 1 to 32000
Number of Cycles = 1 0 to 65535
Sensitivity = 1
µ
A/V 100 mA/V to 10 pA/V
Specific parameters
Quiet Time (sec) = 2 0 to 65535
Comments
When the
Number of Cycles
is set to 0, the cycling continues indefinitely
until it is stopped by the user.
To Next Page
Loading...