Baur DTA 100 C User Manual

DTA 100 C Device settings
822-129-8 37 / 90
8.5.2 Adjusting the stirrer
Main menu > Device settings > IEC 60156:2018 settings > Stirrer
1. In the main menu, select the menu item Device settings.
2. Select the menu item Next to confirm the selection.
3. In the Device settings menu, select the IEC 60156:2018 settings menu item and then
Next.
4. Select Stirrer menu item.
5. Choose one of the following settings by pressing the arrow keys:
 without stirring: The stirrer is inactive when a standard based on the IEC 60156 is
selected.
 contin. stirring: The stirrer runs constantly when a standard based on the
IEC 60156 is selected.
6. Click Save to confirm the entry.

Baur DTA 100 C Specifications

General

Brand	Baur
Model	DTA 100 C
Category	Test Equipment
Language	English