Baur DTA 100 C - Ordering accessories and spare parts

Maintenance DTA 100 C
78 / 90 822-129-8
16.6 Ordering accessories and spare parts
 Only use accessories and original spare parts recommended by BAUR.
 Order accessories and spare parts from your nearest BAUR representative
(http://www.baur.eu/baur-worldwide).
Order number
Description
670-087
Transport case
670-085
Dust cover
565-513
Printer ink ribbon, blue
565-514
Paper roll for printer, plain paper, Ø 30 mm, width 57 mm
650-209
Face pin wrench for disassembling the test vessel
650-129
Magnetic stirrer
650-229
Lifting stick for magnetic stirrer
432-270
Setting gauge 1 mm in accordance with ASTM D1816
430-109
Setting gauge 2 mm in accordance with ASTM D1816
430-110
Setting gauge 2.5 mm in accordance with IEC 60156
430-105
Setting gauge 2.54 mm in accordance with ASTM D877
431-298
Setting gauge 4 mm in accordance with BS EN 60156
430-111
Setting gauge 5 mm in accordance with SEV EN 60156
415-538
Pair of electrodes in accordance with IEC 60156 Fig. II
415-539
Pair of electrodes in accordance with IEC 60156 Fig. I
415-540
Pair of electrodes in accordance with ASTM D877
415-523
Test vessel 0.4 litre made of glass in accordance with IEC 60156 Fig. I
415-522
Test vessel 0.4 litre made of glass in accordance with IEC 60156 Fig. II
415-525
Test vessel 0.4 litre made of glass in accordance with ASTM D1816
415-524
Test vessel 0.4 litre made of glass in accordance with ASTM D877
415-510
BAUR Report Manager – External USB interface for measurement data
management