The BAUR ITS Lite software is used to read measurement results and to design and archive
measurement logs of the BAUR DTA 75 C, DTA 100 C and DTL C insulating oil testers.
14.1 Description of function
Reading of measurement logs from BAUR insulating oil testers and archiving with ITS Lite
takes place automatically.
To read the measurement logs, start ITS Lite and define the save and print settings. The
following settings are available in ITS Lite:
Language selection for measurement logs. Both the software interface and user manual
are displayed in the selected language.
Save format selection for measurement logs: PDF or as a text file (*.TXT).
Integrate logo or header in PDF measurement logs.
Now you only need to connect one or more insulating oil tester to the PC on which ITS Lite
will run. If measurement logs already exist in the device memory of a connected insulating oil
tester, ITS Lite will read the logs as soon as a connection is established between the
insulating oil tester and the PC. These measurement logs will be saved in the predefined
storage location (path) according to the settings, but will not be printed.
When a connected insulating oil tester completes a new measurement, the measurement
data is automatically transmitted to ITS Lite and is processed as follows:
A measurement log is generated automatically from the received measurement data and
is saved in PDF format and/or as a text file (*.TXT) in the predefined storage location.
If the Print option is enabled, the measurement log is printed on the selected printer.
The measurement log contains the following details:
Information on the insulating oil tester (device type, serial number, firmware version),
Measurement time (date and time),
Sample number and name of measurement log,
Measurement parameters and measured values,
Measurement diagram with the graphical display of the test voltage (DTA 75 C and
DTA 100 C) or with the graphical display of the measured tan δ values (DTL C), as
required.
To Next Page
Loading...
Need help?
General
