A
About this manual • 6
Adjusting the stirrer • 37
Applicability of the instructions • 6
Avoid dangers, take safety measures
• 10
B
Basic insulating oil test procedure •
20
BAUR ITS Lite software for
measurement data management • 68
C
Calibration • 77
Carry out a standardised
measurement • 45
Checking the measurement accuracy
of the oil breakdown voltage tester
(optional) • 70
Checks to perform before
commissioning • 25
Clean the electrodes • 28
Cleaning the oil breakdown voltage
tester • 72
Commissioning • 25
Configure settings for user-defined
measurements • 41
Configure the ASTM settings • 39
Configure the IEC 60156
2018 settings • 35
Continuous measurement template •
53
Creating a user-defined
measurement • 52
D
Dangers when working with electric
voltage • 11
Declaration of conformity • 85
Delivery includes and Options • 84
Description of function • 68
Device settings • 33
Display individual breakdown values
• 39
Display of measurement results • 64
Disposal • 83
Disposing of the device • 83
Disposing of the insulating oil • 83
E
Earthing the oil breakdown voltage
tester • 26
Editing or deleting a user-defined
measurement • 63
Entering numbers • 21
Error messages and corrective
measures • 80
F
Faults • 79
Fill and use the test vessel • 29
For your safety • 9
Full illustration • 13
I
Information on the oil breakdown
voltage tester • 24
Information on the USB interface • 24
Insert the test vessel • 31
Installing ITS Lite • 69
Installing the oil breakdown voltage
tester • 26
Instructions for sampling • 30
Instructions to the user • 9
Intended use • 10
To Next Page
