M
Main menu • 23
Maintenance • 71
Measurement log as printout • 65
Measurement log on the display • 66
Menu navigation • 21
N
Note on the screenshots and
graphics used • 8
O
Operating and display elements • 16
Operating the oil breakdown voltage
tester • 21
Ordering accessories and spare
parts • 78
Overview of standards • 44
Overview of templates • 53
Overwrite measurement logs • 35
P
Packaging • 81
Power supply • 17
Product information • 13
Putting the device out of operation •
67
Q
Quick test • 48
R
Rating plate • 18
Replacing the electrodes • 27
Replacing the fuse • 77
Replacing the printer ink ribbon • 76
Replacing the printer paper roll • 74
Reset settings • 43
Running a user-defined
measurement • 61
S
Saving user-defined measurements •
60
Select language • 34
Selecting a template • 54
Selecting which measured values are
not to be evaluated • 59
Set date • 42
Set display brightness • 33
Set the hold time before the first
measurement • 40
Set time • 43
Setting an electrode gap • 28
Setting the duration of the pauses
between measurements • 56
Setting the electrode shape • 38
Setting the hold time before the first
measurement • 36, 54
Setting the maximum output voltage •
57
Setting the number of measurements
• 57
Setting the slew rate for the test
voltage • 55
Setting the stirring time during the
hold time • 55
Setting the stirring time in the pauses
• 56
Setting the withstand voltage • 58
Special personal protective
equipment • 12
Standardised measurement • 44
Starting ITS Lite • 69
Storage • 82
Structure of safety instructions • 6
Switch printer on/off • 34
Symbols and abbreviations on the
display • 22
T
Technical data • 19
Transportation • 81
Transportation and storage • 81
Troubleshooting • 79
Turning on the oil breakdown voltage
tester • 32
To Next Page
Loading...
Need help?
General
