baxter OV500G2EE User Manual

INSTALLATION INSTRUCTIONS
OV500-EE SERIES GAS RACK
OVENS AND OV500 SERIES
ELECTRIC RACK OVENS
OV500G1-EE ML-132518
OV500G2-EE ML-132525 (BEFORE MARCH 2015)
OV500E1 ML-132522
OV500E2 ML-132524 (BEFORE APRIL 2015)
OV500G2EE ML-132529 (AFTER FEB 2015)
OV500E2 ML-132531 (AFTER MARCH 2015)
- NOTICE -
This Manual is prepared for the use of trained Baxter Service
Technicians and should not be used by those not properly
qualified.
This manual is not intended to be all encompassing. If you have
not attended a Baxter Service School for this product, you should
read, in its entirety, the repair procedure you wish to perform to
determine if you have the necessary tools, instruments and skills
required to perform the procedure. Procedures for which you do
not have the necessary tools, instruments and skills should be
performed by a trained Baxter Service Technician.
The reproduction, transfer, sale or other use of this Manual,
without the express written consent of Baxter, is prohibited.
This manual has been provided to you by ITW Food Equipment
Group LLC ("ITW FEG") without charge and remains the property
of ITW FEG, and by accepting this manual you agree that you will
return it to ITW FEG promptly upon its request for such return at
any time in the future.
SERVICE MANUAL
A product of Baxter MFG. Co., Inc 19220 State Route 162 East Orting, WA 98360
F45469 Rev. D (1019)

baxter OV500G2EE Specifications

General

Control Type	Digital
Material	Stainless Steel
Power Supply	208-240V, 3-phase
Temperature Range	150°F to 500°F
Door Type	Glass Door

Summary

Important Safety Information

General Oven Information

Model Specifications

Technical specifications for OV500G1-EE, OV500G2-EE, OV500E1, and OV500E2 ovens.

Installing the Oven

Oven Section Handling

Instructions for positioning and lifting oven sections.

Removing Shipping Brackets

Steps to remove shipping brackets from oven sections.

Connecting Oven Sections

Procedure for joining oven sections securely.

Oven Positioning and Initial Leveling

Installing dolly wheel and positioning oven before final leveling.

Final Leveling and Door Squareness

Final oven leveling and door squareness adjustments.

Oven Door Installation

Detailed steps for installing the oven door.

Oven Start-Up Procedures

Oven Caulking and Initial Power-Up

Ignition Sequence and Safety Checks

Verifying ignition sequence timing and safety lock-out functionality.

Gas Pressure and Initial Heating

Adjusting gas pressure and performing initial oven heating cycles.

Combustion Analysis and Steam Test

Performing combustion analysis and steam leakage tests.

Altitude Adjustments and Final Checks

Altitude Correction Chart

Final Installation Checks

Completing checklist and recording start-up data.