Creating, Editing, or Deleting a Port
5-8 BEA Systems, Inc.
The Create New Port pane opens on the right.
a. In the Name field, type a name.
b. In the Description field, type a brief description (optional).
c. From the Disposition Protocol drop-down list, select IBSE.
d. In the Disposition field, enter an iBSE destination using the following format:
ibse:svcName.mthName;[responseTo=responseTo];[errorTo=errorDest]
The following table lists and describes the disposition parameters for iBSE.
5. Click OK.
The port appears under the ports node in the left pane. In the right pane, a summary of
the information associated with the port appears.
Procedure: How to Create a Port for the MSMQ Disposition
The MSMQ disposition supports public and private queues. To create a port for an MSMQ
disposition using Application Explorer:
1. Click the Event Adapters tab.
2. In the left pane, expand the SAP node.
3. Select the ports node.
4. Move the pointer over Operations and select Add a new port.
The Create New Port pane opens on the right.
a. In the Name field, type a name.
Parameter Description
svcName Name of the service created with iBSE.
mthName Name of the method created for the Web service.
responseTo Location to which responses to the Web service are posted.
Optional.
Predefined port name or another disposition URL. The URL must
be complete, including the protocol.
errorDest Location to which error logs are sent. Optional.
Predefined port name or another disposition URL. The URL must
be complete, including the protocol.
To Next Page
Loading...