EasyManua.ls Logo

Bender ISOMETER isoRW425 - Device Operation; Display Elements in Use

Bender ISOMETER isoRW425
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
isoRW425_D00052_03_M_XXEN / 02.2017
5. Device operation
The menu structure is illustrated schematically on the following pages.
After pressing the "MENU" button for > 1.5 seconds, the first menu item "AL"
appears. Use and (Enter) buttons for navigation and settings.
Up and down button:
- to navigate up or down the menu settings
- increasing or decreasing values
MENU
Pressing the MENU/Enter button for more than
1.5 s:
- Starts menu mode
- or when the device already is in menu mode:
Exit menu item (Esc).
Any recent changes will not be stored.
Pressing the MENU/Enter button for less than
1.5 s:
- Confirms menu selection
- or confirms modified value
The areas of the display that can be configured flash!

Table of Contents

Other manuals for Bender ISOMETER isoRW425

Related product manuals