Technical data
71
isoRW425_D00052_03_M_XXEN / 02.2017
Other
Operating mode ........................................................................................................................... continuous operation
Mounting ..................................................................................................... cooling slots must be ventilated vertically
Degree of protection, built-in components (DIN EN 60529) ................................................................................. IP30
Degree of protection, terminals (DIN EN 60529) .................................................................................................... IP20
Enclosure material.................................................................................................................................... polycarbonate
DIN rail mounting acc. to................................................................................................................................. IEC 60715
Screw fixing ......................................................................................................................... 2 x M4 with mounting clip
Weight ................................................................................................................................................................ ≤ 150 g
( )* = factory setting
10.2 Standards, approvals and certifications
The ISOMETER® has been developed in compliance with the following
standards:
DIN EN 61557-8 (VDE 0413-8):2015-12 / Ber1:2016-12
DIN EN 50155:2014-12
IEC 61557-8:2014/COR1:2016
10.3 Ordering information
Type Version Art. no.
isoRW425-D4W-4 Push-wire terminal B71037000W
isoRW425-D4W-4 Screw-type terminal B91037000W
Mounting clip for screw fixing
(1 piece per device)
B98060008
To Next Page
Loading...
Need help?
General
