41Menu functions
Settings
• Press to enter its submenu.
• Press to save your changes and exit.
See below for details.
• Language
Sets the language for the On-Screen Display (OSD) menus.
• Projector
Position
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See "Choosing a location" on page 14
for details.
• Te s t P a t t e r n
Enable this function to display the grid test pattern, which helps
you adjust the image size and focus so as to check if the
projected image is free of distortion.
• Auto Source
Search
Sets whether the projector searches automatically for input
sources.
Select On to enable the projector to scan for input sources until
it acquires a signal. If the function is set to Off, the projector
selects the last used input source.
• Menu Type
Switches to the Advanced OSD menu.
• HDMI
Format
Selects an input source type for the HDMI signal. You can also
manually select the source type. The different source types carry
different standards for the brightness level.
“HDMI Format” is only available when the HDMI signal is
selected.
• Wall Color
Enable this function to help correct the projected picture’s color
when the projection surface is not white. You may choose a
color similar to that of the projection surface from these
options: Light Yellow, Pink, Light Green, or Blue.
• Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: “Keystone”, “Projector
Position”, “Source Rename”, “Reset Lamp Timer”, “Test
Pattern”, “High Altitude Mode”, “Password”, and “Key
Lock”.
Menu Submenus and Descriptions
CH100_EN.book Page 41 Wednesday, March 2, 2016 11:54 AM
To Next Page
Loading...
