42 Menu functions
Basic OSD menu - without input signals connected
As there’s no input signal to your projector, only the submenus of Settings under Basic
OSD menu - with input signals connected are available. Menu options that are not available
will become grayed out.
To access the OSD menu, press .
•Use the arrow keys (///) to move through the menu items.
• Use to confirm the selected menu item.
• Use to save your changes and exit.
To switch from the Basic OSD menu to the Advanced OSD menu, see page 37.
• Information
Displays the following information about your projector.
• Source: Displays the current signal source.
• Picture Mode: Displays the current Picture Mode.
• Resolution: Displays the native resolution of the input
source.
• Color System: Displays input system format.
• LED Usage Time: Displays the number of hours the
lamp has been used.
• Firmware Version: Displays the firmware version of
your projector.
Some information is given only when certain input sources are
in use.
Menu Submenus and Descriptions
Menu Submenus and Descriptions
Language
Sets the language for the On-Screen Display (OSD) menus.
Projector Position
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See "Choosing a location" on page 14
for details.
Te s t P a t t e r n
Enable this function to display the grid test pattern, which helps
you adjust the image size and focus so as to check if the
projected image is free of distortion.
Auto Source
Search
Sets whether the projector searches automatically for input
sources. Select On to enable the projector to scan for input
sources until it acquires a signal. If the function is set to Off, the
projector selects the last used input source.
Menu Type
Switches to the Advanced OSD menu.
CH100_EN.book Page 42 Wednesday, March 2, 2016 11:54 AM
To Next Page
Loading...
