Controls and Terminals14
English
Making Connection
• Before connecting any component, please familiarize yourself with the location and type of
each input. If incorrect connections are made, picture or color quality may be adversely
affected. Please ensure that all connectors are firmly seated.
• Your DVD player, VCR or home theatre system can be connected to the rear of the television so
that you can enjoy a complete audio-visual experience. Before connecting external devices,
turn off the power to the television for safety.
No. Name Description
1 AC INLET Connect the power cord (provided) to this input.
2AV1 & AV2
• VIDEO (Composite (AV) signal input, RCA connector): Attach the
Composite video output of your DVD player or other AV device.
• AUDIO(Audio input, L/R): Attach the audio out of your DVD
player or other AV device here. This input is used with combination
(AV) and S-VIDEO input.
• S-VIDEO (S-VIDEO input): Attach the S-VIDEO OUT of your
DVD player or other AV device here.
3ANTENNA Attach your antenna (not provided) to this input.
4 COMPONENT
• Y (Component video input, Y CB/Pb Cr/Pr): Attach the component
image input of your standard progressive scan DVD player or
HDTV here. The *Y connector (green) can also be used as a second
composite signal input.
• AUDIO(Audio input, L/R): Attach the audio out of your DVD
player or other AV device here.
5PC
• PC D-SUB (15-pin D-SUB computer signal input): Connect your
computer's monitor (analog RGB) output here.
• PC AUDIO: Connect your desktop or notebook computer's audio
output here.
6
DVI (Digital Video
Interface)
• DVI/HDCP (Digital Video Input): Attach the digital output (digital
RGB) from your PC or video here.
• DVI AUDIO (Audio input, L/R): Connect the audio output of
digital signal here.
7
OUTPUT (L/R/
WOOFER)
Attach the audio input of an amplifier here.
To Next Page
Loading...
