58 Making connection
English
3. Press to enter the printer settings and set the necessary settings.
4. After all settings are complete, press or to select
Print and press
to start printing.
To print all files with DPOF tag:
1. On Print Mode menu, press or to select Print DPOF.
2. Press to enter the printer settings and set the necessary settings.
3. After all settings are complete, press or to select Print and press
to start printing.
• To view the selected image in full screen display, slide the Zoom lever to . To
switch back to thumbnail display, slide the Zoom lever to .
• The maximum number of copies is 99.
• The above procedure may vary depending on the printer type you are using.
• If you connect the camera to your printer while the printer is still starting up, the
camera will be automatically turned off.
• Failure to follow the above procedure will make the camera show an error
message. Please disconnect the camera and the camera will be automatically
turned off.
To Next Page
Loading...
Need help?
General
