BENSHAW RediStart RB2 User Manual

P82 Fault Log FL1
LED Display LCD Display
Range FL1 – FL9
Description When a fault occurs, the fault number is logged in non-volatile memory. The most recent fault is in FL1 and
the oldest fault is in FL9.
If the starter is equipped with an LCD display, pressing [ENTER] toggles through the Starter data recorded at
the time of the fault. See section 4.13.3 on page 56 for more information.
See Also Fault Codes on page 196.
130
6 - PARAMETER DESCRIPTION
FL1: Last Fault #
Fault Name

BENSHAW RediStart RB2 Specifications

General

Brand	BENSHAW
Model	RediStart RB2
Category	Controller
Language	English